Posted inGeneral Article

RV Roof Replacement Options You Want To Know

If you’ve been in the market for a new roof for your RV, you may be wondering what the best options are. You have a couple of options: EPDM, TPO, or Vinyl. These three options have their advantages and disadvantages. Here are a few things to keep in mind before you decide. Weigh your needs against your budget before you begin. And as always, don’t forget about the quality of the material. Read on to learn more about your RV roof replacement options.


When it comes to the roofing on your RV, you can choose from several types of materials. One of the most common types is EPDM, which stands for Ethylene Propylene Diene Monomer. This material dries into sheets. However, you can also find non-vulcanized EPDM, which does not solidify. Non-vulcanized EPDM is excellent for flashing and detailed work. Both types are synthetic rubber.

White on black EPDM has been used on RVs since 1983. It is low maintenance, easy to repair, and offers excellent noise and temperature insulation. In addition, this type of roofing is now energy-efficient and is available for other uses. However, white-on-black EPDM roofing is not suited for high-traffic areas or heavy foot traffic. Therefore, it isn’t a good choice for RVs that need to withstand heavy foot traffic.

Patching EPDM roofing on your RV is an easy fix. If you’re handy with a pair of sharp scissors, you can cut a patch out of an extra piece of rubber and apply it over the damaged area. It should be at least two inches larger than the damaged area. The patch should be rounded with no jagged edges. Once you’ve applied the patch, could you measure the size and mark it with a pen?


While there are many advantages and disadvantages to both TPO and EPDM materials, you should know that they have some significant differences. While TPO is lighter and easier to fit, it is not as durable or long-lasting as its counterpart, EPDM. The disadvantages of TPO are that it absorbs heat quickly, making it challenging to keep the RV cool in the summer. This material also requires more maintenance.

TPO is the most common material for an RV roof. This synthetic rubber is usually single-ply and is the most expensive option. It will cost you about $1,020 to $2,040 for a 255 square-foot area. Fiberglass is a bit heavier, but it is the most durable option. In addition, fiberglass roofs are highly resistant to heavy weather and require minimal maintenance. But it would help if you considered the weight when choosing a material for your RV.

TPO roofing is also less expensive than EPDM and requires a laminate cover to prevent leaks. However, the material can be more challenging to install and may require other products such as fiber reinforcement to prevent flexing. EPDM is a more economical option and can be installed by RV owners themselves. You can save hundreds of dollars on your RV roof replacement by following these tips. You can also install your own TPO roof on your RV, saving hundreds of dollars in labor costs.


When it comes to vinyl RV roof replacement, there are several choices. TPO is less expensive, lighter, and easier to install, but also much shorter-lasting. On the other hand, EPDM is much more durable and comes in many colors and styles. It may be challenging to find the correct one for your RV, so carefully read all the specifications. After choosing suitable equipment for your RV roof replacement, you can start the installation process.

If you are looking for a low-cost RV roof replacement option, consider purchasing a new TPO roof. The price is significantly less than an EPDM or vinyl roof, but the top is more prone to problems. When buying a new RV, scrutinize the roof to ensure it doesn’t have a leak or other issues. TPO and vinyl are both great options for RV roof replacements.

If you want to install a new fiberglass roof, you must carefully remove the existing panels. Make sure you carefully follow the directions on the manufacturer’s instructions. You may have to use a chisel to remove rivet heads and drip edges and use a putty knife to cut out the termination bars. Make sure to use a putty knife on the old roofing before proceeding. Then, remove any remaining pieces that are not attached to the new roof.